Price: $99.95 - $89.95
(as of Sep 18, 2024 23:07:42 UTC – Details)
Product Description
The processor’s information can be viewed and configured remotely using smartphones with Android or iOS systems. Its digital signal processor allows real-time modification of equalization, crossover filters, alignment, gain control, phase inversion, limiter, input/output routing, and features such as: Battery Voltmeter, Frequency Generator, Frequency Sweep and Pink Noise.
The compact TPT-SP4BT is signal processor (DSP) controlled by bluetooth connection direct from your phone or tablet. This powerful tool allows users to optimize the performance of their custom sound system, regardless of whether they are using a aftermarket unit or factory radio.
In your device’s app store (Play store) or (Apple Store), search for our Timpano TPT-SP4BT app. Once installed, open the app to configure and use your audio processor.
Our crossovers are designed to provide the perfect frequency distribution to ensure the clarity and peak efficiency throughout your custom system.
Bluetooth Car Audio Signal Processor DSP – TPT-SP4BT
Number of channels Input: 2 x RCA (A+B) or 2 x HIGH INPUT (A+B) / Output: 4 (1, 2, 3, 4) Graphic equalizer 15 Bands (gain ±12dB) Output gain -45dB ~ +15dB per output Frequency generator 10Hz ~ 22kHz and Level -60 ~ 0dB Battery voltage monitor Current, minimum and maximum voltage Frequency response 10Hz ~ 22kHz @ 0dB Max. Output voltage 5,6 Vpp (+8,2 dBu) Power supply 10V ~ 15V DC Max. Output current SEQUENCER 180 mA per output Rated current consumption 170mA @ 12.6V DC Range 15 meters Compatibility Android 5.0 or higher / iOS 12 or higher Dimensions (H x W x L) 1.3” x 3.8” x 7.4” Weight 0.40 Lb
Product Dimensions : 3.15 x 2.36 x 0.5 inches; 8.78 ounces
Item model number : TPT SP4BT
Date First Available : January 26, 2023
Manufacturer : Timpano
ASIN : B0BT68NQ87
The compact TPT-SP4BT is signal processor ( DSP ) controlled by bluetooth connection direct from your phone or tablet. This powerful tool allows users to optimize the performance of their custom sound system, regardless of whether they are using a aftermarket unit or factory radio.
The processor’s information can be viewed and configured remotely using smartphones with Android or iOS systems. In your device’s app store (Play store) Or (Apple Store), search for our TIMPANO TPT-SP4BT app
Its exclusive sequencer feature (SEQUENCER) makes it possible to configure the programmed startup and shutdown of up to three products from the remote startup connections (S1, S2, and S3).
ts digital signal processor allows real-time modification of equalization, crossover filters, alignment, gain control, phase inversion, limiter, input/output routing, and features such as: Battery Voltmeter, Frequency Generator, Frequency Sweep and Pink Noise.
4
Reviewer: C. Burchsted
Rating: 5.0 out of 5 stars
Title: Great Device at this Price
Review: I bought the Timpano DSP mostly as a limiter because I was not satisfied with a competing product. The Timpano has a lower input noise and wider dynamic range. It should do a great job for most applications if you understand how it works. Adjusting it is not really for beginners, so for those new to this please keep an open mind that you may discover things you didn’t know and may need to seek out an expert or do some research. You need some supporting tools to do this and even with tools, expect to take some time to optimize things. You don’t want to “wing” it or tune by ear or you won’t get everything that your system is capable of and you could waste a lot of time.Before going through the tuning process here are some important features of the Timpano:Low costLight plastic case with simple 2-fastener mounting.Low profile and small sizeFree Bluetooth app which worked perfectly with my Samsung Android phoneThe RCA inputs are semi-floating, low noise, differential inputs (nice!)The “high” or Spr input is also differential and attenuated by 20dB and has a 1K impedance.Up to 15dB gainLimiter threshold is based on signal’s 1/2-wave rectified average value, referenced to the full output.Full output (0dB) is about 5.6vpp or +8dB VU.There was a gradual drop in output above 12KHz but this can be managed with the EQ.Power supply rejection is as good as most other equipment but be sure to feed it clean power.The “auto” settting of the limter is 100mS attack and “1600mS” release – but please see below.The EQ is applied at the input and affects all outputsThere are separate adjustable parametric filters for the individual ouputs, before the limiter.The unit’s best feature is the low noise differential input which the mfr does not mention. All gear with RCA inputs should be made this way. This design breaks any ground loop on the input, making it easier to interconnect this with other devices without having ground currents flow and picking up noise in the process. This makes the unit perform well even with the plastic case. I found no extra noise resulting from the unshielded case. I’m not sure I would use this device for recording just in principle, but the noise figures look great actually.Setting the maximum input level reaching the Timpano is important because the Timpano inputs clip at around 5.6vpp or +8dB. Some gear powered by 120V can generate an output significantly greater. I have a mixer/preamp which generates more than +18dB which would be a huge overload. In order for things to interoperate properly, I built a -11dB resistive divider to permit the full output from my preamp to be fed to the Timpano. To offset this the 15dB of internal gain on the Timpano was needed. The noise performance was impacted slightly but was still completely acceptable.Some customers mentioned the flimsy RCA jacks. At this price I’m not concerned but be smart. I would not under any circumstance plug a “monster” cable into this. Monster cables are for looks only, waste money, and damage fragile jacks. Use only soft, thin RCA cables whose connectors are neither loose or tight. You don’t need to spend a lot of money on RCA cables.The power terminals are well-made if you treat them properly with wire that is not stiff and you do not overtorque the terminals. They are recessed and have square washers for a secure fit. They depend on the circuit board for support so don’t abuse them.My only “complaint” is the release time of the limiter is shorter than advertised. The “attack” time works properly at up to 100mS. The release time is actually about 1/4 of the advertised 1600mS or 400mS. The limiter lamps don’t turn off until about 1200mS but by then the audible effects of the release have long decayed. 400mS is a short release time and will give a pumping effect if the limiter is hard-driven on music with a pulsing bassline. For “normal” use the decay is OK but there isn’t extra room to adjust it. It should be advertised as a smaller number.The limiter threshold tends to work a little differently on devices from different manufacturers. This is not a peak limiter or RMS limiter, but approximately a half-wave averaging limiter and the threshold needs to be adjusted based on that. A threshold of around -18dB (1/2-wave rectified, averaged, with respect to the peak output) is good. This allows a sin wave to generate a peak VU output of around -6dB. With this setting, music or white noise will peak at about +3dB VU. The Timpano output clips at about +8dB VU so there is still 5dB headroom within the limiter and the musical output can remain unclipped or nearly so, depending on the musical attack. I would not recommend increasing the threshold above -13dB or music may be clipped if you drive the system hard.The above paragraph gives hints on how your amp should be adjusted. I would suggest a VU meter that handles the full amp output. Wear hearing protection and play a sin wave and increase the amp gain until clipping, then back off by 6dB. Final adjustment would be with your ears, being careful if you need protection. With the limiter driven hard, increase the amp gain until you can just hear the distortion, then back it off until you can’t.With this setting the amp will still be clipping slightly on the attacks which are already exaggerated by the 100mS response of the “auto” setting on the limiter. The effect of the exaggerated attacks will be offset by them being clipped and the result is the effects largely cancel. This is the loudest your amp could play and sound fairly clean using the limiter’s “auto” setting. It should be slightly “fatter” and clearer than what you get without the limiter and should have no distortion “crunch” unless that’s what you tuned for. You should also be able to increase your input volume all the way and it will not get louder or sound much different.I haven’t even mentioned the EQ. An inexpensive but amazing RTA tool was used for tuning the EQ. I used a Dayton Audio iMM-6 (older generation) calibrated mic with Bofinit “Audiotool” app installed on an old unused Android phone. I also used a white noise test file. Full volume is not required so save your ears and play the white noise at medium volume without the limiter kicking in. After calibrating the mic by downloading and installing the Dayton Audio calibration file, play the white noise and record the speaker’s profile with the audiotool RTA app at full resolution. My speakers were EV SX100+ and the profile I recorded using the RTA matched the engineering data sheet from the mfr almost exactly. I made two tweaks, using the parametric EQ to tame down a ringing of the tweeters at 18K, and using the graphic EQ to push down the response at around 6K. The speakers sound smoother and I’m very satisfied with the DSP doing its job.The additional tools I used for tuning were absolutely necessary but not expensive. I used an old PC with embedded line in and out jacks. The software was Cool edit 96, Audacity, and VLC media player. I also needed a peak VU meter which was the most expensive tool. A cheap AC voltmeter can work instead of the VU but skills are needed to understand the reading. If it’s an averaging or true RMS meter the reading will continue to increase even during clipping and the results can be misleading. Resistors were needed to give the VU meter enough range to handle the maximum voltage from the power amp, making the peak output fall into the middle of the VU meter range. Resistors were also needed to level shift between my preamp and the Timpano.To sum up, a limiter should be used to complete just about any audio system big or small. To me the graphic EQ of this product is just a free bonus. Together these features make the Timpano a great product. If adjusted properly you will be able to hear the difference and your system will be more forgiving and enjoyable.
Reviewer: Demechio E.
Rating: 5.0 out of 5 stars
Title: Necessary for car audio
Review: This device was very useful. The adjustments you make is very essential to everyone sound system
Reviewer: Steve P.
Rating: 4.0 out of 5 stars
Title: Pretty nice.
Review: This is really the only product of its kind, as far as I can tell. Was looking for a simple stereo DSP to use inside a classic jukebox for volume and EQ. But this unit is four channel, which is fine. All audio adjustments are made through an iPhone app, which is very nice for a jukebox, as most of those controls were originally internal and not easy to access. Sound quality is good, and the unit is fairly intuitive to setup and use. One quirk with the software, however: You have to use the appâs âconnectâ button to establish a Bluetooth connection. Trying to do it with your phone causes it to fail. Other than that minor annoyance, itâs a good product that I would get again.
Reviewer: Kindle Customer
Rating: 5.0 out of 5 stars
Title: Effective low cost unit
Review: Lowest cost bluetooth unit that I could find that would suit my intended purpose. Installed on a 21 Harley Road Glide. I wanted a way to remotely set crossover points without having to take my bike apart. The graphic EQ and bluetooth control via the app makes the unit worth every cent I paid for it.
Reviewer: Cristopher Torres
Rating: 5.0 out of 5 stars
Title: Quality processor
Review: Thanks to this i was able to remove the 2 preamps that i had in my car glove box and im so happy i did installed it now my car audio system sounds a lot more clean and the quality has a improved by a lot, is not that hard to use if you have knowledge in equalizing and working with crossover points but even if you don’t know is not that hard to get it working they way you need it.
Reviewer: Chana-rules
Rating: 1.0 out of 5 stars
Title: DSP
Review: Be careful test it out as soon as you get it the one I got no good.
Reviewer: Big E
Rating: 3.0 out of 5 stars
Title: Good Bang for the $, Good luck updating it…
Review: For the money, it’s pretty good.Pros: lots of ways to adjust your soundCrossovers rolloff can go from a smooth slope up to a 36db/o wallParametric eq frequency and gain for chosen central frequency can be boosted or reduced and the q factor can be as wide or narrow as neededIndividual grain per channel and master gain for all channelsAuto or adjustable limiter to protect your speakers and ampsInput summingFine tune sound curve with graphic eqPink noise and frequency generator4x 12 volt, remote turn on outputs for amps, led accent lights or whatever needs a 12v triggerCan be used as a hi/lo converter to add aftermarket amps to a factory stereoEasy to connect with BluetoothCons:Cheap plastic constructionRCA connectors feel weak, possibly break off the board if you get too rough or snag a cable on somethingUgly user-interface (but that’s just my opinion)Hi-level input connector/wires aren’t of the biggest gauge and are hard to unplug, feels like wires may pull off connectorMain reason for rating: update over Bluetooth has not been successful yet and until it decides to quit update looping after failing the update, you cannot login to the management app so you cannot adjust anything.I like the DSP’s functionality and it sounds good, but build quality and updates failing could be a major issue for some. There are 3x brands that sell the exact same device with a different name on the sticker/box, I can only imagine that they all have the same bug in the firmware.
